The AET should be set in accordance with the following table, and the port should be set to 5679 on all workstations.Workstation Frontdesk1 Frontdesk2 Consult1 Consult2 Consult3 Pathology Preproom1 Preproom2 Kennelroom Ofce AET KPACS-F1 KPACS-F2 KPACS-C1 KPACS-C2 KPACS-C3 KPACS-PA KPACS-P1 KPACS-P2 KPACS-K KPACS-O
#K PACS VIEWER INSTALL#
Setup K-PACSThe following procedure should be followed on all the workstations that are to have access to the PACS system: (a) (b) Run the K-PACS Installer, and let it install into the default location of C:\KPacs, with images saved in C:\KPacs\Imagebox.
MyACRNema = CONQUEST FileNameSyntax = 8 The rst change simply sets the AET fro the Conquest DICOM server, and the second forces the PACS hierarchy to be organised as: ID\Studyuid\Seriesuid\Imageuid.dcmĥ.
#K PACS VIEWER ARCHIVE#
See Sylvania Veterinary Hospital: DICOM Image Archive for Ultrasound (2007) Setup Conquest DICOMSetting up Conquest DICOM has also been covered in an earlier document,1 and the same setup should be used here except for the following modications to dicom.ini:1 Setup UltrasoundSetting up the ultrasound equipment has been covered in an earlier document,1 and the ultrasound should be setup identically here.Ĥ. The current version is V1.5.0, and is 6.2MB in size.ģ.
The K-PACS software can be downloaded from: Click on DOWNLOADS, and select the K-PACS All-in-one Installer. DownloadsThe following software must be downloaded from the internet to setup this system: (a) The Conquest DICOM software can be dowloaded from: At the time of writing, the current version of Conquest is 1.4.13, and the following les should be downloaded: dicomserver1413.zip bdeinstall5.zip (b) (5685 KB) (4022 KB) and all client workstations will use port 5679.Ģ. The K-PACS DICOM server in each workstation will be setup with an AET like KPACS-F1, KPACS-C3 etc. The K-PACS viewer will be used on each of the client workstations to access images stored in the PACS. All images from the ultrasound will be stored on CONSULT3 by Conquest, which will act as the PACS server for the rest of the workstations. The Conquest DICOM server will use an AET of CONQUEST and operate on the default port of 5678. The ultrasound system will talk to the Conquest DICOM server, which is to be setup on the workstation CONSULT3 at address 192.168.1.15. It is located at the network address of 192.168.1.100, and is set to use an AET of HDI3000, on the default port of 104. The requirements for SVH are: (a) At this time the only source of DICOM images at SVH is a Philips HDI 3500 ultrasound system.
#K PACS VIEWER HOW TO#
IntroductionThis note describes how to setup the K-PACS/Conquest DICOM PACS system used at Sylvania Veterinary Hospital. Setting Up K-PACS with Conquest DICOM(1 / gsm)ġ.
0 kommentar(er)
